Several highly-successful single-ply roof membrane products hit the roofing market in the 1970's. These single-ply roofs typically contain a rubber or polymer membrane. Ethylene Propylene Diene Monomer (EPDM) Terpolymer, Polyvinyl Chloride (PVC), and Thermoplastic Olefin/Polyolefin Thermoplastic (TPO) roof membranes are flexible-sheet materials that are used in one-ply or one-layer configurations. The roof membrane's chemical and physical characteristics allow it to repeatedly soften when heated and harden when cooled.
Properly installed single-ply roof systems have service lives ranging from 10 to 20 years, depending upon the type of installation and materials used. When deciding whether a single-ply membrane roofing system is right for you, it is important to consider whether the building is suited for a single-ply membrane at all. Generally speaking, single-ply membrane roofing is appropriate when weight is a consideration, the roof has adequate slope, structural movement is expected, the installation involves covering an existing membrane, and installation will take place in cooler weather.
Ethylene Propylene Diene Monomer (EPDM) Terpolymer is simply a product consisting of three distinct monomers. EPDM is classified as a Thermoset material, which means it is either fully-cured prior to being installed, or that it cures during natural weathering after installation. EPDM roofs are single-ply membranes — there is only one ply of roofing material, not multiple plies laminated together.
EPDM is a rubber material whose principal components consist of the compounds ethylene and propylene. A flexible rubber matrix forms when a small amount of diene is added to the mix. EPDM is available reinforced or unreinforced with both commonly used; it's also available in either a cured (vulcanized) or uncured (non-vulcanized) state. Vulcanized EPDM is the most common with non-vulcanized often used for flashing purposes.
EPDM has been used in the USA since the 1960's. It is one of the most common types of low-slope roofing materials available, because it is relatively inexpensive, simple to install, and fairly clean to work with, when compared to conventional built-up roofs. There aren't the odors and fumes that accompany built-up roofs, which appeals to many property owners and managers.
Polyvinyl Chloride (PVC) membrane is a roof membrane composed of only one layer of material. PVC roofs are specially designed to withstand ponding water. A PVC membrane is welded together with hot air (no open flame) to eliminate all seams so moisture can not pass through. PVC roofing systems reflect nearly 90% of the radiant heat of the sun, thus lowering energy costs substantially, especially in high-heat and high-sunlight areas such as the southwestern United States.
Thermoplastic Olefin or Polyolefin (TPO) membranes are single-ply roof membranes constructed from ethylene propylene rubber. They are designed to combine the durability of rubber with the proven performance of hot-air weldable seams. They have been tested as having excellent resistance to ozone, are algae-resistant, environmentally friendly and safe to install.
The material's manufacturers are so confident in properly welded seams that the material is sometimes advertised as a monolithic (seamless) roof. Seam strengths are reportedly 3 to 4 times those of EPDM's adhesive and tape seams. TPO is highly resistant to tears, impacts, and punctures with good flexibility to allow for building movement. TPO's are available in white, light gray, and black with thicknesses of either 45 mils (.045") or 60 mils (.060"). The width of the membrane depends on the manufacturer but they usually come in widths of six to six-and-a-half feet and are one-hundred feet in length.
TPO membranes are installed fully-adhered, mechanically-attached or ballasted. Fully-adhered means that the roof is glued to the substrate using a special adhesive. What actually happens is the glue creates a chemical bond with the membrane. Ballasted simply means the membrane is loose laid over the top of the roof, sealed at all penetrations and around the perimeter, and then a ballast is put on it to hold it in place.
Ballast usually consists of smooth, round, river rock 2" to 3" in diameter and is applied at a rate of 1,000 to 1,200 pounds per roof square. Sometimes concrete pavers are used in their place. These average 20 pounds per square foot. Mechanically-attached membranes are those that use some type of special screw-type fastener to secure it. The type of fastener will depend on the type of substrate but all fasteners are generally screw-type fasteners.
When a leak threatens the integrity of your office or business, it can cause serious distress. Our emergency repair service provides a "right now" solution to your crisis. Repairing your roof can usually save you thousands of dollars, while extending the life of your current roof.
With Blackhawk Roofing, you can count on a timely assessment and repair, to make sure your roof can provide protection to your business as quickly as possible. Our emergency repair installers receive extensive training. They arrive equipped with the experience to find the leak,and the skill to repair it. Blackhawk Roofing also does scheduled roof repair work. We include a warranty (or warranty extension) for all of the work that we do.
You can't predict Central Illinois weather. All it can take is one strong storm to leave your roof damaged and in need of repair. Hail storms, lightning strikes, ice storms, tornadoes and high winds can cause extensive damage to your roof. Blackhawk Roofing will work with your insurance company, assess the damage to your roof, and come up with a long-term solution that makes sense for your circumstances.
The future is unpredictable, but Blackhawk Roofing has you covered with roof maintenance services. If your roof has been damaged, and you'd like to prevent additional damage to your business, be sure you work with dedicated roofing professionals who make emergency roof repairs their highest priority.
The success of your project depends upon our ability to employ the very best people available; that's why we hire employees who take tremendous pride in a job well done. We offer our employees top pay, comprehensive training, and respect. Our employees understand that the race for quality has no finish line. Blackhawk Roofing uses only full-time employees, to maintain superb quality. Our foremen and installers receive extensive training in the latest roof installation techniques. We adhere to all OSHA requirements and regulations.
While many specialty contractors rely on subcontractors, we don't. Everyone you see on your project works for Blackhawk Roofing. Our employees share our philosophy of always going the extra mile. Our people, and the performance they deliver, are the reason why our customers recommend us again and again.
From commercial office buildings and fitness facilities, to warehouses and manufacturing sites, Blackhawk Roofing has a strong reputation in the commercial building sector. We deliver quality work that starts with project planning, and continues until your project is complete. We have worked with architects, building superintendents, commercial property managers, and business owners.
Blackhawk Roofing has the ability to deliver quality roofing systems for all segments of the education sector, including school district offices, elementary schools, secondary schools, and institutions of higher learning. We can work as a primary contractor or sub-contractor, and provide services ranging from project planning, design-build, installation, cleanup and final building inspection.
Blackhawk Roofing is a trusted partner with state and local government. We work as a primary contractor or sub-contractor, and can provide services ranging project planning through all phases of construction. We have worked with local government and non-profit organizations for nearly twenty-five years.
From community centers and senior living centers, to clinics and hospitals, Blackhawk Roofing has a proven history of completing challenging projects on schedule, using our extensive knowledge of roofing requirements. We know how to get things done, and get them done right.